Intro

This Model coverage doc helps to choose which service models to use to run predictions using AGILITY. For a list of all services, protocols, and interfaces that AGILITY supports, see Model Coverage Tables .

4G-5G NSA Connectivity

4G-5G-NSA Data

The 4G-5g-NSA model includes the following captures required from NE interfaces:​

eNodeB: X2

gNodeB: X2 (for 5G NSA configuration)

MME: S1_MME, S11, S6a

S-GW: S11, S5c

P-GW: S5c, Gx, Gy

PCRF: Sy

5G-SA Connectivity

5G-SA Captured Data Points

5G-SA Data

The 5g-SA model includes captures of Data calls from:​

gNodeB: N3​

AMF: N2, Namf, Npcf, Nudm, Nsmf, Naf, Nnef, Nausf, Nnrf​

SMF: N4, Nsmf, Nudm, Npcf, Nnrf, Namf, Nchf​

UPF: N3, N4, N6​

UDM: Nudr, Namf ​

PCF: Nbsf, Nsmf, Nudr​

5G SA Captured Data Points Diagram

​The 5G-SA Mobility Model’s Captures

The 5G-S model includes captures of handover calls from:​

gNodeB: Xn, Xnc, N2​

O-CU: Xn, Xnc, N2 (O-Ran scenarios)​

AMF: N2​

UPF: N3, N6​

• 5G SA​

• Xn based handover (handled directly between gNodeB’s)​

• N2 based handover (Coordinated by AMF)​

5G-SA Mobility Captured Data Points Diagram

The Inter-RAT / EPS Fallback 5G - 4G Mobility Model’s Captures

Method #1: 5G to 4G Inter-RAT Handover​

In this method, the N26 interface between AMF and MME uses a Forward Relocation procedure and session management context. Additionally, user plane tunnels in the core network are exchanged over from SMF/UPM to MME/S-GW.​

Method #2: 5G to 4G Release with Redirection​

In this method, the 5G radio connection is released with the 5G RRC Release instructing the UE to reselect to a 4G cell where a new radio connection can be started for the VoLTE call. In this case, the UE context is transferred from the AMF to the MME over the N26 interface.

The Inter-RAT / EPS Fallback 5G - 4G – Mobility Model captures:

eNodeB: X2​

gNodeB: X2 (for 5G NSA configuration)​

MME: S1_MME, S11, S6a​

S-GW: S11, S5c​

P-GW: S5c, S5u, SGi​

AMF: N26, N2, S11​

SMF: N4, Nsmf, Nudm, Npcf, Nnrf, Namf, Nchf​

UPF: N3, N4, N6​​

Inter-RAT / EPS Fallback 5G - 4G Mobility Captured Data Points Diagram

The Voice & Video Services: VoLTE Model’s Captures

The Voice & Video Services: VoLTE Model captures:

MME: S1_MME, S11, SLs​

S-GW: S1u, S5c, S5u​

P-GW: S5c, S5u, Gm, Gy, Gx​

OCS: Gy, Sy, Ro​

HSS: S6a, Cx, Sh​

S-CSCF: Mw, Mx, Mr, Mg, Mi, ISC, Cx​

TAS: Mr​

IBCF: Ici ​

MGCF: ISUP​

Voice & Video Services: VoLTE Captured Data Points Diagram

The Voice & Video Services: VoNR Model’s Captures

VoNR Scenario #1:  Diameter Routing Agent (DRA) ​

Scenario 1 consists of a Diameter Routing Agent connected with 5G Core that supports Diameter​, In this scenario, the Voice & Video Services: VoNR Model captures Voice / Video calls from:​

gNodeB: N3​

AMF: N2, HTTP2 SBA services​

SMF: N4, HTTP2 SBA services​

UPF: N3, N4, N6​

UDM: HTTP2 SBA services​

PCF: HTTP2 SBA services​

I/S-CSCF: Mw, ISC, Cx​

TAS: Sh​

VoNR Scenario #1 Captured Data Points Diagram

VoNR Scenario #2 – Interworking Function ​

Scenario 2 consists of Diameter to HTTP2 using Interworking Function (IWF) connecting IMS with 5G Core through HTTP2 bus. ​In scenario 2, the Voice & Video Services: VoNR Model captures Voice / Video calls from:​

gNodeB: N3​

AMF: N2, HTTP2 SBA services​

SMF: N4, HTTP2 SBA services​

UPF: N3, N4, N6​

UDM: HTTP2 SBA services​

PCF: HTTP2 SBA services​

I/S-CSCF: Mw, ISC, Cx​

TAS: Sh​

VoNR Scenario #2 Captured Data Points Diagram